| HS编码 | 商品名称 | 退税率 | 计量单位 | 海关监管 | 申报要素·检疫 | 编码对比 |
| 72044900.30 | 符合GB/T 39733-2020标准要求的未列名再生钢铁原料
[Compressed auto body] |
0% | 千克/无 | A | 查看详情 | -- |
| 72044900.90 | 其他未列名钢铁废碎料
[Ferrous waste and scrap, not elsewhere specifiled or included] |
0% | 千克/无 | 9A | 查看详情 | 对比-72044900.30 |
| 72045000.00 | 供再熔的碎料钢铁锭
[Remelting scrap ingots of iron steel] |
0% | 千克/无 | 9 | 查看详情 | 对比-72044900.90 |
| 72051000.00 | 生铁、镜铁及钢铁颗粒
[Granules of pig iron, spiegeleisen, iron or steel] |
0% | 千克/无 | B | 查看详情 | 对比-72045000.00 |
| 72052100.00 | 合金钢粉末
[Powders of alloy steel] |
0% | 千克/无 | B | 查看详情 | 对比-72051000.00 |
| 72052910.00 | 平均粒径小于10微米的铁粉
[Iron powder with an average particle size of less than 10 microns] |
0% | 千克/无 | B | 查看详情 | 对比-72052100.00 |
| 72052990.00 | 其他生铁、镜铁及其他钢铁粉末
[Other pig iron, mirror iron, and other steel powders] |
0% | 千克/无 | B | 查看详情 | 对比-72052910.00 |
| 72061000.00 | 铁及非合金钢锭
[Iron and non-alloy steel in ingots] |
0% | 千克/无 | B | 查看详情 | 对比-72052990.00 |
| 72069000.00 | 其他初级形状的铁及非合金钢
[Other primary forms Iron and non-alloy steel] |
0% | 千克/无 | B | 查看详情 | 对比-72061000.00 |
| 72071100.00 | 宽度小于厚度两倍的矩形截面钢坯
[Semi-finished products of iron or non-alloy steel, of rectangular(including square)cross-section, the width measuring less than twice the thickness(containing by weight less than 0.25% of carbon)] |
0% | 千克/无 | B | 查看详情 | 对比-72069000.00 |
| 72071200.10 | 其他矩形截面的厚度大于400MM的连铸板坯
[Other semi-finished products of iron or non-alloy steel, of rectangular(other than square)cross-section, thickness is more than 400MM(containing by weight less than 0.25% of carbon)] |
0% | 千克/无 | B | 查看详情 | 对比-72071100.00 |
| 72071200.90 | 其他矩形截面钢坯
[Other semi-finished products of iron or non-alloy steel, of rectangular(other than square)cross-section, (containing by weight less than 0.25% of carbon)] |
0% | 千克/无 | B | 查看详情 | 对比-72071200.10 |
| 72071900.10 | 其他含碳量小于0.25%的厚度大于400MM的连铸板坯
[Other semi-finished products of iron or non-alloy steel, thickness is more than 400MM,containing by weight less than 0.25% of carbon] |
0% | 千克/无 | B | 查看详情 | 对比-72071200.90 |
| 72071900.90 | 其他含碳量小于0.25%的钢坯
[Other semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% of carbon] |
0% | 千克/无 | B | 查看详情 | 对比-72071900.10 |
| 72072000.10 | 车轮用连铸圆坯（直径为380MM和450MM，公差±1.2%，含碳量：0.38%-0.85%，含锰量：0.68%-1.2%，含磷量≤0.012%，总氧化物含量≤0.0012%）
[Continuous casting round billets for wheels (diameter 380MM and 450MM, tolerance (+ 1.2%), carbon content: 0.38% - 0.85%, manganese content: 0.68% - 1.2%, phosphorus content < 0.012%, total oxide content < 0.0012%)] |
0% | 千克/无 | B | 查看详情 | 对比-72071900.90 |
| 72072000.90 | 其他含碳量不小于0.25%的钢坯
[Other semi-finished products of iron or non-alloy steel, containing by weight 0.25% and more of carbon] |
0% | 千克/无 | B | 查看详情 | 对比-72072000.10 |
| 72081000.00 | 轧有花纹的热轧卷材
[Flat-rolled products of iron or non-alloy steel,in coils, not further worked than hot-rolled, with patterns in relief] |
0% | 千克/无 | 查看详情 | 对比-72072000.90 | |
| 72082500.00 | 厚≥4.75mm其他经酸洗的热轧卷材
[Flat-rolled products of iron or non-alloy steel, in coils, not further worked than hot-rolled, of a thickness of 4.75mm or more,of a width of 600 mm or more,not clad, plated or coated:] |
0% | 千克/无 | 查看详情 | 对比-72081000.00 | |
| 72082610.00 | 4.75mm>厚≥3mm其他大强度热轧卷材
[Flat-rolled products of iron or non-alloy steel, in coils, of a thickness of 3mm or more but less than 4.75mm,of a width of 600 mm or more,of a yield strength exceeding 355N/mm2not clad,] |
0% | 千克/无 | 查看详情 | 对比-72082500.00 | |
| 72082690.00 | 其他4.75mm>厚≥3mm热轧卷材
[Flat-rolled products of iron or non-alloy steel, in coils, of a thickness of 3mm or more but less than 4.75mm,of a width of 600 mm or more,of a yield strength less than 355N/mm2not clad] |
0% | 千克/无 | 查看详情 | 对比-72082610.00 | |